Page 1 of 3 123 Last
  1. #1

    Join Date
    May 2006
    Location
    Kansas
    Posts
    16
    --
    Hell yeah! Hell no!

    Any 1911 Fans Here?




    I was wondering how many fans of the 1911 there are in here. I know that I am new to these forums so I thought that I would introduce myself with my Colt. I built this pistol myself and got it back from the finisher about a year ago. And have been putting it through itís paces ever since.

    First and foremost, this pistol has been 100% reliable; since I got it back from the refinisher I have put approx. 5,000 rounds through it without a hitch. The ammo has varied from 200 SWC handloads, 230 FMJ reloads that simulate my carry ammo. In addition to my reloads I have put several hundred rounds of my carry ammo through it as well, which is Black Hills 230 JHP. It was reliable from the factory, but I wanted to make modifications that would maximize reliability. It must have worked because I can cycle a magazine full of empty cases through it without a hitch.

    The trigger job came out very well at a crisp 3.5 pounds, there is no creep, and the pull has remained consistent since I performed it 5,000 rounds ago. Since it is a Colt, a dehorn was almost mandatory to make it comfortable to carry, as you will notice it is very slight and all of the factory lines were maintained.

    The EGW bushing squeezed every possible bit of accuracy out of the factory barrel, when I sighted it in, two inch ragged hole groups at fifteen yards were so easy it wasnít even a challenge.

    Here is the list of parts that I installed:


    • Novak Sights
    • Ed Brown Barstock Hardcore Hammer
    • Ed Brown Match Disconnector
    • Ed Brown Perfection Sear
    • Greider Precision V-Series Match Trigger
    • Ed Brown Grip Safety
    • Smith & Alexander Mag Well
    • Ahrend's Square Bottom Cocobolo Grips
    • Ed Brown Tactical Ambi Safety
    • EGW Angle Bore Bushing
    • Ed Brown Tactical Magazine Catch

    Here is a list of the modifications that were performed:

    Reliability was maximized by:


    • Polishing the Feed Ramp
    • Polishing the Breechface
    • Polishing and Tuning Extractor
    • Polishing the Barrel Hood
    • The Ejection Port was Lowered and Flared to Gold Cup Specifications

    Thanks for looking!
    Last edited by Robert McLeod; 5/08/2006 10:41pm at . Reason: Pics messed up

  2. #2
    Olorin's Avatar
    Join Date
    Nov 2004
    Posts
    2,057
    --
    Hell yeah! Hell no!
    Everyone who is worth their salt likes the 1911 45 caliber auto.

    The only drawbacks are weight, low ammo capacity, and bad ramp feeding in unmodified or original pistols.

    Here is why I decided not to buy a 1911, a good 1911 needs to have extensive modification or be from one of the high-end manufactures.

    Too many 1911 fans build, or buy, the Ferrari of guns when a Glock or Springfield XD is nearly as good at half the price. I think I broke my metaphor. Anyway, I would take my Glock 45 over, letís say, a Kimber in a self-defense scenario because accuracy, trigger creep and over travel, do not trump 14 round of 45apc and ease of operation.

    It is the same reason I own an AK-47 clone and not an AR-15.
    Last edited by Olorin; 5/09/2006 1:04am at .

  3. #3

    Join Date
    Aug 2004
    Posts
    3,173
    --
    Hell yeah! Hell no!
    But you have to admit that the coolness facto of a 1911 is hard to match.

  4. #4

    Join Date
    Feb 2003
    Location
    San Diego
    Posts
    8,750
    --
    Hell yeah! Hell no!
    Very nice weapon. I am a fan of the 1911A1. I just back my slide from Springfield Armory for my TRP Operator, my adjustbable sites took a dump.

    I bought a new Wilson Combat 8 rd clip as well, and got a FTF on my 11th round. After Tap,Snap and Rack, didn't get another FTF. I attribute it more to the clip than the firearm.

    I understand that everyone says better to have too much, than too little. After training with tactical versus target shooting, I found my 17 rounds is more than enough when carrying a 1911. Sure I reloaded more than my other fellow students, but at the end of the day, my shots were just as good, two to the chest, and one to the head.
    Quote Originally Posted by Sifu Rudy Abel
    "Just what makes a pure grappler think he can survive with an experienced striker. Especially if that striker isn't following any particular rule set and is well aware of what the grapplers strategies are".

  5. #5
    <plasma>'s Avatar
    Join Date
    Jul 2005
    Posts
    7,583
    --
    Hell yeah! Hell no!
    The 1911 is sweet.

    For me the drawbacks from the ones I handle and one I shot is
    1. At the moment I really don't like the .45 caliber. Its too big of a round for me.

    2. The 1911 size is too big to fit in my hand comfortably

    However, at the last gun show I was at their was a 1991A1 Colt .45 that was a sweet size for my hand, Stainless Steel for $600. If I end up purchasing a .45 in the future I going to look at that again.

  6. #6
    OFFICIAL Mayor of Cwcville supporting member
    Boyd's Avatar
    Join Date
    Sep 2002
    Location
    Cwcville
    Posts
    5,382
    --
    Hell yeah! Hell no!
    I just want you all to know I initially read the thread title as "Any 9/11 fans here?"
    Captain's Log: Just a little update for all my TRUE and HONEST friends out there:

    1) I am STRAIGHT! I am STRAIGHT! Get it through your thick skulls, numbskulls!

    2) My name is not Ian Brandon Something.

    3) Kacey is coming with me now. I have stolen her from the other Christian Weston Chandler.

    REMINDER: I am still the one and only true creator of sonichu and rosechu electric hedgehog pokemon

  7. #7
    <plasma>'s Avatar
    Join Date
    Jul 2005
    Posts
    7,583
    --
    Hell yeah! Hell no!
    Quote Originally Posted by Boyd
    I just want you all to know I initially read the thread title as "Any 9/11 fans here?"
    :( .....

  8. #8
    Not over zealous, but just zealous enough. 病気の粗悪品

    Join Date
    Feb 2006
    Location
    Texas
    Posts
    1,417
    --
    Hell yeah! Hell no!
    I have one with ivory grips that was in WWI with my grandfather, & Vietnam with my father. It is now in my nightstand next to my bed.

    Which reminds me, does anyone know where I can find clips for a Remington made, yes REMINGTON made M1911?

    In theory the Colt clips are SUPOSED to work, but they don't. I only have one clip, so I keep in loaded for home defense, i.e. hollow points. I would like to have another clip loaded with rat shot just in case of rattlesnake.

    Remington M1911 clips anyone?
    People often tell me that I fail to see the gravity of the situation.
    I see the gravity, and I say...

    Step right up folks and watch me defy gravity!

  9. #9

    Join Date
    Feb 2003
    Location
    San Diego
    Posts
    8,750
    --
    Hell yeah! Hell no!
    Uh, wow. NO idea on the mags. :(
    Quote Originally Posted by Sifu Rudy Abel
    "Just what makes a pure grappler think he can survive with an experienced striker. Especially if that striker isn't following any particular rule set and is well aware of what the grapplers strategies are".

  10. #10
    jnp's Avatar
    Join Date
    Apr 2005
    Location
    Austin, TX
    Posts
    8,344
    --
    Hell yeah! Hell no!
    To the OP, I love the 1911. One of the friendliest handguns I've ever fired. It is my earnest desire to own one someday.
    Shut the hell up and train.

Page 1 of 3 123 Last

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in
Single Sign On provided by vBSSO