3/13/2014 7:50pm, #61
- Join Date
- Jan 2014
This is very useful thread. I need to buy some steel toed boots for the zombie apocalypse. Also, does anyone the name of the boots that Savate uses?
3/14/2014 7:08am, #62
- Join Date
- Jan 2008
- Sanctuary of Pallas Athena (Belgium)
- Savate (LBF/SD/LC) - BJJ
The shoes are called "Savate", but they don't have a steel toe.
It's just the regular material of the shoe and sole that comes together in a more pointier design.Originally Posted by Jiujitsu77Originally Posted by HumanzeeOriginally Posted by jk55299 on Keysi Fighting Method
3/16/2014 10:54am, #63
8/18/2014 2:09am, #64
- Join Date
- Jun 2014
True. A polearm shaft can break. But in my experience, it isn't very likely.
Obviously, it depends a lot on the material you have. Some kind of special cold steel hard rubber probably won't break for nuthin, for example. Usually, the main concern of a polearm breaking is in the middle of combat is from being struck and cut by a sword or other polearm. Although it could technically happen, it's extremely unlikely that a person's strikes will land on the polearm in the same spot repeatedly (if at all) or have the right angle to even make more than a cursory cut.
I think you need to be more worried about general wear and tear, repeated blows breaking the shaft from one of your own swings. And even then, only if you hit it against and unforgiving object like the ground or a tree, a shitload of times. Not so much faces.
But again, it all depends on the material. Rattan will cut and splinter real easy. Maple will work for a while, but excessive abuse and drying out from age is going to bring a break.
I can't recall what the traditional or common woods are for making polearms. But I like to use ironwood. If you attempt to cut it, your weapon will probably either slide off or get stuck. At the very least dull the mcshit out of your blade. It's not super heavy, but it's heavier than maple. But unlike maple, it bends and absorbs the recoil that would normally hurt your hands.
Exactly how hard ironwood is....it's kind of ridiculous. I once braced a 4ft dried ironwood stick against the ground with one hand and tried to brake it with a metal baseball bat with the other.
Didn't even scratch. Didn't even come close to cracking. After smacking it 20 or so times, it gets bent ever so slightly, and you can bend it right back into place. Literally, good as new. Longer sticks are easier to break though.
Even if ironwood does break, it doesn't completely snap. It splits vertically. Kind of like rattan, but instead of splintering, it's a single, full on split. But it doesn't even break off the stick when it splits. If it did, that'd be great, because it's a spear instead of a bo now. :P :)