United States Marine.
Posted On:2/12/2011 1:16am
Style: MCMAP, BJJ
Just got this beast (fo' free), a beretta 92fs (m9, for you military types)
The damn mag doesn't fit into the magazine well, its stuck! The french? it wasn't doing this **** before. The only thing that changed were those gay ass stag grips he had on them before got switched back to the original.
So yeah, what should I do?
PROOF that I'm not a completely useless poster:
Originally Posted by Cy Q. Faunce
3moose1 is correct. Sig THAT, you fucker.
Originally Posted by sochin101
I went out with a delightful young woman who was on a regimen of pills that made her taste of burned onions.
That is not conducive to passionate cunnilingus, my friend, let me assure you.
Originally Posted by HappyOldGuy
I agree with moosey
Posted On:2/13/2011 1:10am
Is it possible that whomever switched the grips borked the grip bushings badly enough to interfere with the mag well?
Are there any marks on the magazine?
Posted On:2/13/2011 3:55pm
Stupid thread is stupid, the screws were too tight. Its fixed
Posted On:2/13/2011 9:45pm
Don't **** this up. Your screws CANNOT be too tight for your Model 92. If your screws are "too tight" and your screws are going into the magazine well, then you are missing the grip screw lock washer(s) from the frame. IF YOU ARE MISSING ONE...you will tighten them all the way down and they will scratch/impede the insertion/removal of your magazine.
If you don't have one, basically it will allow your grip screws to be screwed down into the magazine well, which will either prevent you from inserting a magazine into the gun, or if you screw them in while the magazine is in the gun, you won't be able to get the magazine out.
Here's a picture, it's PART 69.
Yeah...I know; Microsoft Paint FOR THE WIN! I also know that the grip screws don't protrude WHATSOEVER into the mag well when you use the lock washers (as barely indicated in my pic), but I'm not going for scale or technical accuracy, here. Just an explanation of what likely is amiss.
Last edited by Lord Skeletor; 2/13/2011 10:13pm at .
Posted On:2/13/2011 11:04pm
i will go look, thank you!
Posted On:2/14/2011 6:08am
Brownells: Beretta 92/96 Part# C97081
You can confirm it's the part labeled “69” in this schematic.
EDIT: I am proud that I've gone from knowing next to nothing about guns to being able to accurately diagnose a Beretta 92 problem based on my knowledge of M1911A1 internals (even though I used the wrong term for the part).
Last edited by Robstafarian; 2/14/2011 6:12am at .
Articles and Reviews
Tools and Info